It's been a while since I cleaned my K&N Filter Charger so today I decided to do it. In the process I took some pictures for a Do it Yourself article. Click the images below to go to the 6 Step process on how to clean your K&N Filter Charger.

It's been a while since I cleaned my K&N Filter Charger so today I decided to do it. In the process I took some pictures for a Do it Yourself article. Click the images below to go to the 6 Step process on how to clean your K&N Filter Charger.

After bolting on the connecting rods I bolted on the main cap girdle and noticed that I have very little room between my ARP rod bolt and the girdle so I had no choice but to notch the girdle.

Getting the rings to the proper spec was actually easier then I thought, all I did was oil up the cylinder walls, inserted 1 ring at a time and pushed it down 1″ with the piston head, then I used a feeler gauge to check the clearance. If the...

Last weekend I had some more time to work on the engine so I started by pulling off the masking tape from the block and cleaned up any tape residue from the paint job. After that I washed the block with some soap and hot water, and then quickly dried...